Medisystems 9060 Series bed-head panels are specially fabricated units for hospital use, designed to converge all the essential utilities around the patient’s bed. These bed-head panels are configured to carry user terminals for electrical power, illumination, communications, biosignals, data, medical gas and carry a medical rail with a range of mountable accessories like examination lamps, BP instrument holder, case sheet holders, IV and infusion pump stands, bowl holders and the like.
Medisystems circuit protected bed-head panels have now become part of ICU and patient room infrastructure in every hospital. Standard configuration panels are available for ICU, wards, private rooms/suites, custom configurations to closely meet user requirements are also available.
Medisystems bed-head panels are constructed from light weight extruded aluminium sheets and sections and from stainless steel. The aluminium is surface treated with epoxy-polyester powder coats in a seven stage process which ensures life time protection to the metal surface with ease of cleaning and ability to withstand damage from common hospital fluids like saline, drugs, blood etc. These light weight panels can also be mounted on non-brick walls made of siporex or gypsum board. All panels have safety metal partitions between high voltage, low voltage and medical gas outlets.
Medisystems manufactures a very wide range of such panels to meet practically every kind of need. Such panels are available in standardised as well as custom configurations which include horizontal, vertical, running length or wall angular orientation, in colours and finish of choice.
Standard types of panels
- Model 9060A, ICU Bed-Head Panel Wall mounted, mains operated bed-head panel for use on ICU / MICU / SICU beds, Pre / Post-Op recovery beds and resuscitation beds. Dimensions: 1800 mm L x 250 mm H x 65 mm D
- Model 9060B, Room Bed-Head Panel Wall mounted, mains operated bed-head panel for use on patient beds in private and deluxe wards.
Dimensions: 1400 mm L x 25 mm H x 65 mm D - Model 9060C, Ward Bed-Head Panel Wall mounted, mains operated bed-head panel for use on general ward beds, light duty day care and ambulatory patient beds, and examination/ consulting room beds.
Dimensions: 880 mm L x 250 mm H x 65 mm D
| Bed-head panel utilities | ||||
| Medical gas | Bio-signals and data | Electrical power | Illumination | Optional utilities |
| Terminals for oxygen, vacuum and air with redundant terminals for critical areas like the ICU, post-op recovery and trauma | Connectors for linking patient monitoring and alarm signals to centralised monitoring facilities, nurse-call systems. Connectors for input or display, links with HIS servers and or the Internet | Electrical sockets for all medical equipment brought to the bed-side like ventilators, monitors, infusion pumps, etc | Switches for room, reading, night lamp and examination lamps | Analog/ digital clock, medical rail of international dimensions and accessories like examination lamps, I.V. Pole assembly, infusion pump stand, blood pressure intrument holder, case sheet holder, bowl holder and utility baskets |
Bed-head panel features
Construction: Medisystems bed-head panels are constructed from light weight extruded aluminium sheets and sections and stainless steel. These provide corrosion free properties suitable for use in humid and coastal areas.
Metal fabrication: Panel fabrication is designed to suit any requirement viz horizontal, vertical, at wall angles, partially or fully embedded in the wall and most importantly, light in weight so that it minimises the static load on room walls – even those that are not of full brick construction but of such light materials as siporex, gypsum board, etc.
Metal finish: Suitable grades of high temperature cured epoxy-polyester coats are selected for application after a seven bath protective treatment to the metal. This ensures life time protection to the metal surfaces coupled with ease of cleaning and ability to withstand damage from common hospital fluids – saline, drugs, blood, etc.
Internal safety: Ensured through fitting safety metal partitions to prevent migration of high voltage electricals to low voltage electricals/ electronics and medical gas outlets. Wire contact points are also sealed with silicone or other adhesives, wherever vulnerable.
Electrical harnessing: All electrical wiring is pre-installed at the factory through wiring harnesses to ensure zero error in wiring and complete safety through reliable electrical grounding. Isolation circuit breakers ensure complete safety for operation as well as site maintenance. During site installation, only the incoming mains and UPS wires need to be brought into the panel, for connection.
| Standard panel configurations: | ||||
| S/N | Panel Utilities | ICU Bed-Head Panel | Room / Deluxe Suite Bed-Head Panel | Ward Bed- Head Panel |
| 1 | Extruded Aluminium epoxy-polyester powder coated | Y | Y | Y |
| 2 | MCB wired for Isolation | Y | Y | Y |
| 3 | 6/16A Electrical Switch/Sockets | 8 | 4 | 2 |
| 4 | 3 Switches for Patient Bed Lamps | Y | Y | Y |
| 5 | RJ-11 for Intercom/EPABX Phone | Y | Y | Y |
| 6 | Bio-signal Connector Slot (for patient Monitor) | Y | ||
| 7 | RJ-45 Data Connector for HIS network | Y | Y | Y |
| 8 | Nurse-Call Bed Unit Slot (for Nurse-Call System)Y | Y | Y | Y |
| 9 | Medical Gas Terminal Slot (for Medical Gas supply) | 6 | 2 | 2 |
| 10 | Quartz/ Digital clock (optional) | Y | Y | Y |
| 11 | Medical Rail-Stainless Steel | Y | Y | Y |
| 12 | Medical Rail Accessories | Y | Y | Y |
| 13 | Colour (optional) | Y | Y | Y |
| 14 | Finish ( Matt / Glossy | Y | Y | Y |
|
Y – Yes Available
|
||||
Medisystems 9070 patient bed lamps
Patient bed lamps are made in light weight powder coated aluminium with glass diffusers and mirror optic reflectors. They come pre-fitted with uplighter, downlighter and LED nightlamps. All lamps can operate independently. Made with energy efficient 14W or 21W T5 FTL’s and electronic ballasts, they have long lamp life, low electricity consumption and are quick and easy to replace by hospital staff. Each lamp has a colour temperature of 6500 K cool daylight designed to give over 1150 lumens of uniform lighting for bedside areas.
Medisystems 3100 medical rail and accessories
Modern hospital practice requires a large cluster of accessories, devices, instruments and equipments to be located around the patient’s bed at all times. This is especially so for beds in the ICU, Post–Op and emergency areas.
Usually, devices like bed-head panels and pendants are of considerable help in enabling an organised equipment cluster around the patient’s bed. The availability of one or more medical rails on such panels or pendants greatly enhances the utility of these devices, especially if along with the rail, a set of conveniently mountable accessories is also installed.
Medisystems series 3100 Medical Rails are fabricated from 304 grade stainless steel. An internationally standardised section dimension is employed. This ensures that equipment from diverse sources can be mounted conveniently with the help of customised adaptors.
Medisystems medical rails are supplied in pre-fitted lengths on the bed-head panel. As with Medisystems bed-head panels, the medical rails also require no maintenance whatsoever. They provide a lasting and reliable convenience.
A range of medical rail accessories is available. These accessories are mounted on sliders which can easily move on the medical rail and be locked into position on any desired location along the length of the rail. Medical rail accessories are described below:
Case sheet holders: Medical case sheet holders come in two sizes, small and large. The large one is sized to hold X-Ray and Sonography films as well. Case sheet holders are available in the standard version – powder coated aluminium, or in 304 grade stainless steel.
Bowl holders: These are ring holders assembled to hold a standard 6” bowl or a larger 8” bowl. The ring holders and bowls are made of 304 grade stainless steel.
Utility basket holders: These are handy stainless steel wire baskets for general purpose miscellaneous items. They come in two sizes small and large.
Blood pressure instrument holders: Mercury or dial gauge instruments can be mounted on the medical rail slider for convenient location and immediate availability behind the patient’s bed.
I-V Pole assembly: A height adjustable stainless steel pole is mounted on a slider assembly. The pole is crowned with a hook arrangement for up to two I-V bags. The availability of an I-V pole on a medical rail helps reduce floor space clutter around the patient’s bed.
I-V Pole Assembly w/ infusion pump stand: This assembly includes an infusion pump stand, mounted on the vertical limb of the I-V pole. The pole diameter is sized to mount all international brands of syringe and infusion pumps. A stack of four to six pumps can be accommodated.
Suction bottle holder: This is a simple clamp to enable mounting of the suction bottle below the vacuum terminal when medical gas outlets have been brought out through the bed-head panel or the pendant.
Examination lamp assembly: An articulated examination lamp is mounted on a slider for convenient location behind the patients bed. The examination lamp is fitted with a self-reflective spotlight bulb, or optionally a compact fluorescent or led lamp. When not in use, it can be swung out of the way but is always available for use when needed.
Rail slider clamp
This is a bare slider which fits and slides on the medical rail. It can be used to mount any object or accessory of convenience onto the rail.
With more than 175 installations in hospitals and nursing homes all over India and overseas, Medisystems undertakes the design, assembly, factory test, supply, delivery, field testing and commissioning of bed-head panels in standardised as well as almost any type of custom configuration or finish to meet the requirement of every type of hospital.
Contact Details:
Vinay Thadani
Marketing
Email: medisystems@gmail.com